EM 400-400V/7,5kW High performance insulation blowing machine View larger

EM 400-400V/7,5kW High performance insulation blowing machine

3316

New product

EM 400-400V/7,5kW High performance insulation blowing machine

Details

€ 15.478,96

€ 15.478,96 per Piece

Add to wishlist

Details

High-performance blowing machine for professional processing of certified blow-in insulation materials, e.g. cellulose, wood fibre, mineral wool, and other loose insulation materials up to a packing density of 200 kg/m³ and with a certified moisture content of less than 15%. The machine is suitable both for stationary use and mobile use at construction sites. Adjustable slide gate for uniform material flow. Especially good material conditioning with a shredder above the airlock. If required the shredder can be removed and replaced by a section of smooth pipe. Air is supplied by a high-performance, multi-setting blower. The volume of air circulating is determined by the blower setting, which is adjusted at by remote-control. Electrical equipment with various control options, maintenance functions, and function displays Power supply with phase inverter, emergency-stop switch Technical data: - Blower: 5.5kW 5-speed turbine - Conveying pressure: max. 600 mbar - Air flow (nominal/gauged): 450/410 m³/h - Material conditioning with a four-shaft agitator and removable shredder module - Material input controlled by an electrically-operated slide gate, adjustable to 10 progressive settings from the control panel - Rotary airlock V approx. 20 l / 6 chambers incl. airlock chamber vent - Airlock powered by geared motor - Electrical connection 400 V / 50 Hz / 3x16 A / PE, with type-C automatic circuit breaker or safety fuses - Inside the insulation blowing machine, frequency guided drives are installed. The electrical connection must be made according to the applicable national electrical regulations. - Dimensions: approx. 1200 x 1000 x 1800 (L x W x H) - Volume of hopper, approx. 0.98m³ - Weight approx. 410kg - Processing speed of up to 1600 kg/h (cellulose), depending on material and position of slide gate Included: Machine base complete with inlet filter, air supply turbine, check valve, airlock with vent, shredder, and electrical equipment. Upper section of the machine with four-shaft agitator and airlock slide gate, 10M 400 V 16 A 5-pole 2,5mm² mains cable, KFB 2000 manual control unit with carrying belt, and 50 m highly-flexible control cable (suitable for use in drag chains) on a cable reel Including a small-parts case containing the following: 1x pressure gauge, 1x control cabinet key, 1x SW10x13 open ended spanner, 1x crank tool, 1x SW13 socket spanner, 1x NW75 quick-connect clamp, 1x silicone spray, 1x V-belt tension gauge, operating instructions Optional extras: - FFB2000-Pro FFB 2000 Pro - FM-radio/cable remote control (Product no. 5154) - EM400/500: Optional add-on AE - blow-off unit (product no. 4038) - EM400/500: Optional add-on DS - Adjustable airlock rotation speed (product no. 5060) - NW75/63 accessory set for loose insulation material (non-abrasive, product no. 5246) - Insulation blowing tools (various product nos.) - NW90 90° intake air duct (product no. 5613) - Direct extension NW75-90 (prod. no. 6746, for that, a conveyor line NW90 is required)