EM 440-3x230V/10,0kW High-powered Insulation Blowing Machine View larger

EM 440-3x230V/10,0kW High-powered Insulation Blowing Machine

6253

New product

EM 440-3x230V/10,0kW High-powered Insulation Blowing Machine

Details

€ 16.334,13

€ 16.334,13 per Piece

Add to wishlist

Details

High-performance compact insulation blowing machine for further processing of officially approved insulation materials such as cellulose, wood fibre as well as granulate and more materials up to a packing density of 200kg/m³ and moisture according to authority but smaller than 15%. The machine can be reused both for the mobile construction application as well as for stationary factory use. Important Notes: A consistent material flow thanks to the adjustable airlock feed gates position. Particularly good conditioning thanks to the shredding unit over the airlock. If required, the shredding unit can be replaced through a component without shredding function. Five high-performance radial compressors produce the required air power. The air volume is selected via the radio remote control and the turbines rotational speed. Electrical equipment with diverse control options, maintenance functions and phase control displays. Emergency switch. Technical Details: - Conditioning unit with four shafts and a replaceable shredding shaft - Material flow volume control adjustable via airlock feed gate and remote control in 10 progressive configurable levels - Dimensions: approx. 1300×1020×1800 (L×W×H) - Hopper volume: approx. 1,0m³ - Empty weight: approx. 460kg - Material processing speed: up to 1600kg/h (cellulose), depending on the material and application - Blower: 5× high-performance radial compressors - Conveying pressure: max. 480mbar (adjustable) - Air flow (nominal/gauged): 975-850m³/h - Airlock volume: approx. 20 L, 6 chambers including airlock chamber ventilation, airlock drive via a gear box motor - Electric connection: full load 3x 230V/50 Hz/16A/N/PE, part load 2x 230V/50 Hz/16A/N/PE or 1x 230V/50 Hz/16A/N/PE - Inside the insulation blowing machine, frequency guided drives are installed. The electrical connection must be made according to the applicable national electrical regulations. - Rated power: 10,0kW - CE Identification Delivery contents: - Fully functional insulation blowing machine, consisting of bottom machine part complete with suction filter, air generator, check valve, airlock with ventilation, shredding shaft as well electricity - Top machine part with conditioning unit with four shafts and airlock feed gate - 3x 10m net cable 230V/16 A 3-pin 2,5mm² - Cable remote control KFB2000 and shoulder strap, 50m highly flexible control cable on cable reel - Stainless steel-Y-piece with hose clamps and hoses for booster connection - Tool box, including: 1x pressure gauge | 1x control cabinet key | 1x fork wrench SW13/10 | 1x machine crank handle | 1x socket wrench SW13 | 1x fast clamps NW75 | 1x silicone spray | document folder including operating instructions | test reports and CE-Declaration of Conformity Options: - EM4XX: Additional module sack portion device (prod. no. 6087) - FFB 2000-Pro - FM radio or cable remote control (prod. no. 5154) - EM440: additional option AE - pressure relief valve (only EM440-3x230V) (prod. no. 6526) - EM400/500: mounting feet (prod. no. 5301) - Mains voltage display for 230V connection (prod. no. 4604, up to 3 pieces) - Accessories set NW75/63 for loose insulation material (not abrasive, prod. no. 5246) - Insulation blowing tools (various prod. no.) - Intake manifold 90° NW90 (prod. no. 5613) - Intake manifold 90° NW75 (prod. no. 5614) - Direct extension NW75-90 (prod. no. 6746, for that, a conveyor line NW90 is required)